Our industrial ceramics drum lining STS4000 guarantees minimum downtimes and thus a high plant availability. You profit from maximum belt utilisation and a simultaneous longer belt life since the belt tension is reduced. A high resistance to weathering as well as to thermal, mechanical and chemical influences ensure the trouble-free operation and maximum conveying efficiency of your plant. This makes STS4000 the ideal overall solution for belt conveyors.
STS5086 is characterised by the same properties as STS5069. However, it has been optimised by greatly improved wear properties.
STS5069 has a finer material structure, making it a practical alternative to STS5068 in drive technology. In addition, the high mechanical strength allows an economic use in electromechanical brakes and clutches.
Extreme operational demands often occur in drive and lifting technology as well as mechanical engineering. This is why the best materials are needed. STS4590 has a high coefficient of friction and is thus suitable for use in disc brake linings, for example in crane brakes and rotor brakes in wind turbines. It can also be used in the field of sintered friction linings.
Of the various friction materials, our resin-bonded, metal-free material STS4009 is the ideal platform for use in safety clutches. It enables a high and at the same time stable coefficient of friction on the basis of a very strong material structure as well as a high compressive and mechanical strength. This material thus ensures a very reliable and operationally safe static use, even under high loads.
Very high coefficients of friction are often important in drive technology. STS5068 is an optimum partner for economical drive technologies. Its metal-free and semi-elastic material structure make it the perfect material for use in electromechanical brakes and clutches.
In modern drive and sealing technology, good sliding properties and the lowest possible coefficient of friction are crucial for an economic operation of plants. STS4100 is thus an ideal choice here. It is suitable for rotary kiln seals and sliding elements such as chain guides. A good wear resistance and high mechanical strength are further convincing product properties.
A tried and trusted friction material from the family of resin-bonded fibreglass- and mineral powder-reinforced materials. It is characterised by high thermal reserves for coefficients of friction and structural strength as well as a high material strength. It thus allows an optimum screw fitting and a long service life and is resistant to all common belt lubricating oils. Finally, STS2010 offers a medium to high coefficient of friction in both dry and oily conditions and is suitable for static and dynamic applications.
With its operating temperature of up to 250 °C, STS 2050 is the ideal ceramic ContiRoll press lining to optimise the productivity of your plant. Costly downtimes can be avoided through a better belt control, an extremely long service life and maximum temperature resistance. We offer a greatly prolonged service life and a high wear resistance. Your benefit is the trouble-free and highly efficient operation.
