A tried and trusted friction material from the family of resin-bonded fibreglass- and mineral powder-reinforced materials. It is characterised by high thermal reserves for coefficients of friction and structural strength as well as a high material strength. It thus allows an optimum screw fitting and a long service life and is resistant to all common belt lubricating oils. Finally, STS2010 offers a medium to high coefficient of friction in both dry and oily conditions and is suitable for static and dynamic applications.

Technical datastaticdynamic
Mean coefficient of friction
• dry *1
• oiled *2
0,40 µ
0,10 – 0,13 µ
0,40 µ
Tmax Operation temperature *2
Continuous operation
200 °C
200 °C
Please log in for further information

1) Testing in accordance with Krauss at a specific pressure of 1 N/mm², brake disk quality in S355J2
2) Depending on the type of oil and the operating conditions
3) Temperatures quoted relate to the dynamic application case on the surface of the friction lining. The material function as a whole can only be guaranteed if the material is not permanently heated to more than 200 °C.
(Stand: 20.04.2015)